Circuit/System Verification
- Ignition ON.
- Verify the scan tool Left Front Door Ajar Switch parameter changes between Ajar and Closed when opening and closing the driver door.
- If the parameter does not change
Refer to Door Ajar Indicator Malfunction
- Go to next step: If the parameter changes
- If the parameter does not change
- Verify the scan tool Driver Door Open Switch parameter changes between Open and Closed when opening and closing the driver door.
- If the parameter does not change
Refer to Circuit/System Testing
- Go to next step: If the parameter changes
- If the parameter does not change
- A fault is not currently present and may be an intermittent condition