LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Recliner Inner Finish Cover Replacement - Outboard >> Installation Procedure

Installation Procedure

  1. GM5605753Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Recliner Inner Finish Cover (3) - Install

  2. Rear Seat Back Cover Retainer (2) - Install
  3. Rear Seat Riser Finish Cover Retainer (1) - Install
  4. Position the rear of the rear seat cushion cover and pad to the original location.
  5. Secure the J-channel retainers of the rear seat cushion cover and rear seat cushion trim panel.
  6. GM5599028Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Recliner Outer Finish Cover - Outboard (2) - Install

    7. CAUTION:

    Refer to Fastener Caution .

  7. Front Seat Bolt (1) - Install and tighten - Fastener Specifications 
  8. GM5599027Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Recliner Handle (3) - Install

  9. Rear Seat Riser Bolt (2) - Install and tighten - Fastener Specifications 
  10. Rear Seat Recliner Handle Bolt Cap (1) - Install
  11. GM5599026Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Adjuster Handle (3) - Install

  12. Rear Seat Riser Bolt (2) - Install and tighten - Fastener Specifications 
  13. Rear Seat Recliner Handle Bolt Cap (1) - Install
scientia non olet · About LEMON Manuals