LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Hinge Finish Cover Replacement - Outboard >> Installation Procedure

Installation Procedure

  1. GM5605356Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Hinge Finish Cover-Outboard (1) - Install

  2. GM5599028Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Recliner Outer Finish Cover - Outboard (2) - Install

    3. CAUTION:

    Refer to Fastener Caution .

  3. Front Seat Bolt (1) - Install and tighten - Fastener Specifications 
  4. GM5599027Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Recliner Handle (3) - Install

  5. Rear Seat Riser Bolt (2) - Install and tighten - Fastener Specifications 
  6. Rear Seat Recliner Handle Bolt Cap (1) - Install
  7. GM5599026Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Adjuster Handle (3) - Install

  8. Rear Seat Riser Bolt (2) - Install and tighten - Fastener Specifications 
  9. Rear Seat Recliner Handle Bolt Cap (1) - Install
scientia non olet · About LEMON Manuals