LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Hinge Finish Cover Replacement - Inboard (Bench) >> Installation Procedure

Installation Procedure

  1. GM5608395Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Hinge Finish Cover-Inboard (1) - Install

  2. GM5608391Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Recliner Outer Finish Cover - Inboard (2) - Install

    3. CAUTION:

    Refer to Fastener Caution .

  3. Front Seat Bolt (1) - Install and tighten - Fastener Specifications 
  4. Return the opposite rear seat to the original position.
scientia non olet · About LEMON Manuals