LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Frame Rear Finish Cover Replacement >> Removal Procedure

Removal Procedure

  1. GM5605756Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Riser Finish Cover Retainer (1) - Remove [2x]

  2. Release the J-channel retainers from the rear seat cushion cover and rear seat cushion trim panel (2).
  3. GM5605755Courtesy of GENERAL MOTORS COMPANY

    Reposition the rear of the rear seat cushion cover and pad as necessary.

  4. Rear Seat Cushion Trim Panel (1) - Reposition
  5. Using a flat-bladed plastic trim tool, release the retaining clips.
  6. Rear Seat Frame Rear Finish Cover (2) - Remove
scientia non olet · About LEMON Manuals