LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Cushion Trim Panel Replacement (40 Percent, Bucket) >> Installation Procedure

Installation Procedure

  1. GM5606804Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Cushion Trim Panel (1) - Install

  2. Return the rear seat to the original position.
  3. GM5605757Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Back Opening Finish Cover Retainer (1) - Install [4x]

  4. Secure the J-channel retainers on the rear seat cushion trim panel (2).
  5. GM5605756Courtesy of GENERAL MOTORS COMPANY

    Secure the J-channel retainers of the rear seat cushion cover and rear seat cushion trim panel (2).

  6. Rear Seat Riser Finish Cover Retainer (1) - Install [2x]
  7. GM5599036Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Riser Inner Finish Cover-Inboard (1) - Install

  8. GM5599035Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Riser Inner Finish Cover-Outboard (1) - Install

  9. GM5605358Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Riser Finish Cover (1) - Install [2x]

  10. Return the seat to its original position.
  11. GM5599034Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Riser Finish Cover (1) - Install

scientia non olet · About LEMON Manuals