LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Cover and Pad Removal and Installation (Bucket) >> Installation Procedure

Installation Procedure

  1. GM5606233Courtesy of GENERAL MOTORS COMPANY

    Install the rear seat back cover and pad (1) as an assembly.

  2. GM5606231Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Head Restraint Guide Bezel (1) - Install [2x]

  3. Rear Seat Head Restraint (3) - Install
  4. GM5606230Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Some components not shown for graphic clarity.

    Install the rear seat head restraint cable (2).

  5. Close the rear seat head restraint cable cover (1).
  6. Position the rear seat back cover, pad, J-channel retainers, and retainers to the original location.
  7. Zip the left and right rear seat back cover zippers.
  8. GM5599031Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Armrest (2) - Install

    9. CAUTION:

    Refer to Fastener Caution .

  9. Rear Seat Armrest Bolt (1) - Install and tighten - Fastener Specifications 
  10. Position and re-zip the rear seat armrest cover.
  11. GM5599032Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Anchor Plate Bezel (1) - Install

  12. Return the seat to its original position.
scientia non olet · About LEMON Manuals