LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Cushion Cover and Pad Removal and Installation >> Removal Procedure

Removal Procedure

  1. GM5573683Courtesy of GENERAL MOTORS COMPANY

    Front Seat (2) - Remove - Front Seat Removal and Installation 

  2. GM5584617Courtesy of GENERAL MOTORS COMPANY

    Front Seat Bolt (1) - Remove [2x]

  3. Squeeze the front seat cushion outer finish cover retainer to release it from the seat frame.
  4. Disconnect the electrical connectors.
  5. Lift the front seat cushion outer finish cover (2) to release it from the front seat cushion cover wire retainer.
  6. Front Seat Cushion Outer Finish Cover (2) - Remove
  7. GM5023174Courtesy of GENERAL MOTORS COMPANY

    Release the retaining tabs securing the front seat cushion ventilation blower (1) to the front seat vent fan mat.

  8. GM5587513Courtesy of GENERAL MOTORS COMPANY

    Remove the retainers holding the front seat cushion cover to the front seat cushion frame.

  9. Disconnect the electrical connectors and reposition the wiring harness as necessary.
  10. Remove the front seat cushion cover and pad (1) as an assembly.
scientia non olet · About LEMON Manuals