LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> 3rd Row Seat Hinge Finish Inner Cover Replacement - Inner (60 Percent) >> Installation Procedure

Installation Procedure

  1. GM5615189Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Some components not shown for graphic clarity.

    3rd Row Seat Hinge Finish Inner Cover- Inner (2) - Install

  2. 3rd Row Seat Hinge Finish Cover Pin (1) - Install [2x]
  3. Return the seat back cover and pad to the original position.
    4. NOTE:

    Hold both sides of the seat cover together while pulling straight down on the zipper.

  4. Zip the seat back cover zipper.
  5. Return the seat to its original position.
scientia non olet · About LEMON Manuals