Installation Procedure
3rd Row Seat Head Restraint (2) - Install
Install the 3rd row seat head restraint cable (2).
- Close the 3rd row seat head restraint cable cover (1).
- Position the seat back cover and pad to the original location.
- Zip the left and right seat back cover zippers.
- Engage the J-channel retainers to the seat back frame.
If equipped, feed the 3rd row seat pull strap through the bezel (1) to install.
- {If equipped} 3rd Row Seat Back Latch Release Handle Bezel (1) - Install
3rd Row Seat Anchor Plate Bezel-Outboard (1) - Install
- Return the seat to its original position.
NOTE:
Hold both sides of the cover together while pulling straight down on the zipper.