Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat Head Restraint Guide (1) - Install
Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat Head Restraint (2) - Install
Courtesy of GENERAL MOTORS COMPANY

Install the 3rd row seat head restraint cable (2).
Close the 3rd row seat head restraint cable cover (1).
Position the seat back cover and pad to the original location.

NOTE:

Hold both sides of the cover together while pulling straight down on the zipper.

Zip the left and right seat back cover zippers.
Engage the J-channel retainers to the seat back frame.
Courtesy of GENERAL MOTORS COMPANY

If equipped, feed the 3rd row seat pull strap through the bezel (1) to install.
{If equipped} 3rd Row Seat Back Latch Release Handle Bezel (1) - Install
Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat Anchor Plate Bezel-Outboard (1) - Install
Return the seat to its original position.