Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat Back Frame (2) - Install
If NEW threaded components are being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded components are reused, prepare the threaded components using the following steps:
1. Remove any loose cured adhesive from the external threads of the components using a lint free cloth.
2. Thread the cleaned components into the internal mating threads and remove to loosen trapped cured adhesive.
3. Apply thread locking adhesive to the external threads of the components. Adhesives, Fluids, Lubricants, and Sealers
4. Ensure there are no gaps in the thread locking adhesive once applied to the component.

CAUTION:

NOTE:

Bolt holes are oversized to allow for seat back frame adjustment. Align the seat back frame with the opposite side seat back before tightening the seat back frame bolts.

3rd Row Seat Back Frame Bolt (1) - Install and tighten [4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat Back Panel (2) - Install
Rear Seat Back Cover Retainer (1) - Install [7x]
Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat Back Latch Cable (2) - Install
Install the cable retainers (1) to the seat back frame.
Connect the 3rd row seat back latch cable end to the seat back latch.
Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat Pull Strap (2) - Install
Rear Seat Bolt (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat Back Latch Release Handle (3) - Install
Rear Seat Bolt (2) - Install and tighten - Fastener Specifications
Install the cable retainers (1) to the seat back frame.
Connect both 3rd row seat back latch release handle cable ends to the seat back latch.
Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat Hinge Finish Inner Cover- Inner (2) - Install
3rd Row Seat Hinge Finish Cover Pin (1) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat Hinge Finish Cover- Outer (2) - Install
3rd Row Seat Hinge Finish Cover Pin (1) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat Back Cover and Pad (1) - Install - 3rd Row Seat Back Cover and Pad Removal and Installation (40 Percent) , or 3rd Row Seat Back Cover and Pad Removal and Installation (60 Percent)