Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

3rd Row Seat (2) - Remove - 3rd Row Seat Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Using a suitable plastic trim tool, release the 3rd row seat anchor plate bezel plastic retainers.
3rd Row Seat Anchor Plate Bezel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

{If equipped} Using a suitable plastic trim tool, release the retaining tabs.
{If equipped} 3rd Row Seat Back Latch Release Handle Bezel (1) - Remove
{If equipped} Feed the 3rd row seat pull strap through the bezel (1) to remove.
Courtesy of GENERAL MOTORS COMPANY
NOTE:
- Left side shown, right side similar.
- Some components not shown for graphic clarity.
Unzip the left and right seat back cover zippers.
Disengage the J-channel retainers from the seat back cushion frame.
Reposition the seat back cover and pad as necessary to access the 3rd row seat head restraint cable (2).
Using a suitable flat-bladed tool, open the 3rd row seat head restraint cable cover (1).
Release the 3rd row seat head restraint cable (2).
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Using a suitable pointed or flat bladed tool, push the 3rd row seat head restraint guide clip (1) rearward while pulling upward on the 3rd row seat head restraint (2).
3rd Row Seat Head Restraint (2) - Remove
Courtesy of GENERAL MOTORS COMPANY
NOTE:
- Left side shown, right side similar.
- Some components not shown for graphic clarity.
Using a suitable flat-bladed tool, push the plastic tab of the 3rd row seat head restraint guide (1) inward and pull upward to remove from the seat back frame.
Courtesy of GENERAL MOTORS COMPANY

Remove the 3rd row seat back cover and pad (1) as an assembly.