Removal Procedure
WARNING:
Refer to SIR Warning .
CAUTION:
Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced.
- Disable the SIR system. SIR Disabling and Enabling
Place the rear seat (1) in the fold and tumble position.
Rear Seat Belt Anchor Plate Cover (1) - Reposition
- Rear Seat Belt Anchor Plate Bolt (2) - Remove
Using a suitable plastic trim tool, release the retaining tabs.
- Rear Seat Belt Opening Bezel (1) - Remove
NOTE:
Feed the rear seat belt anchor plate and cover through the rear set belt opening bezel to remove.