LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Bumpers And Fascias >> Repair Instructions >> Rear Bumper Impact Bar Replacement >> Removal Procedure

Removal Procedure

  1. GM5539635Courtesy of GENERAL MOTORS COMPANY

    Rear Bumper Fascia (1) - Remove - Rear Bumper Fascia Removal and Installation 

  2. GM5571541Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connectors.

  3. Release the retaining tabs.
  4. Tow Vehicle Electrical Receptacle (1) - Remove
  5. Disconnect the wire harness retainers.
  6. GM5549162Courtesy of GENERAL MOTORS COMPANY

    Spare Wheel Hoist Lock Cylinder (1) - Remove

  7. GM5549164Courtesy of GENERAL MOTORS COMPANY

    Release the tabs (1) on the spare wheel lock cylinder case to remove it from the rear bumper impact bar.

  8. Spare Wheel Lock Cylinder Case (2) - Remove
  9. GM5569473Courtesy of GENERAL MOTORS COMPANY

    Remove the 2 outer left and right side rear bumper impact bar bolt (1).

  10. Remove the 3 lower left and right side rear bumper impact bar bolt (2).
  11. GM5569474Courtesy of GENERAL MOTORS COMPANY

    Rear Bumper Impact Bar (1) - Remove

scientia non olet · About LEMON Manuals