Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

{ If equipped }Head-Up Display Switch (1) - Install
Secure the retaining tabs.
Courtesy of GENERAL MOTORS COMPANY

Vehicle Stability Control System Switch (1)@Instrument Panel Trim Pad - Install
Secure the retaining tabs.
Courtesy of GENERAL MOTORS COMPANY

Parking Brake Control Switch (1) - Install
Secure the retaining tabs.
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Outer Air Outlet (1) - Install
Secure the retaining tabs.
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connectors.
Instrument Panel Trim Pad (2) - Install

CAUTION:

Instrument Panel Trim Pad Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Trim Plate Applique (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Fuse Block Access Hole Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Outer Filler (1) - Install