Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Seat (2) - Reposition [2x] - Front Seat Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Lower Applique (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Applique (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use a flat bladed plastic trim tool.

Front Floor Console Extension Panel Bolt Access Hole Cover (1) - Remove
Front Floor Console Extension Bolt (2) - Remove
Front Floor Console Extension Panel (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Bolt Access Hole Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Lower Applique (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Applique (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use a flat bladed plastic trim tool.

Front Floor Console Extension Panel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Using a flat-bladed plastic trim tool, release the retaining clips.
Front Floor Console Bolt Access Hole Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Retainer Bolt (1) - Remove [2x]
Front Floor Console Bolt (2) - Remove [4x]
Disconnect and reposition harness as necessary.
Courtesy of GENERAL MOTORS COMPANY

With the aid of an assistant, remove the console from the vehicle. (1)