Transmission Neutral Position Sensor Replacement
WARNING: This page is about a different variant/trim than selected.
NOTE:
Callouts items in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Lower the transmission to gain access to the sensor. Refer to Transmission Replacement (MM6 with LT1 Engine, MH3 or MJK with LT4 Engine) Transmission Replacement (M13 with LGX Engine) . |
|
| 1 | Transmission Neutral Position Sensor Fastener (Qty: 2)
CAUTION:
Refer to Fastener Caution . Procedure Clean the threads and apply a threadlocker. Refer to Adhesives, Fluids, Lubricants, and Sealers (MJK or MM6)Adhesives, Fluids, Lubricants, and Sealers (M13) . Tighten 11 N.m (96 lb in) |
| 2 | Transmission Neutral Position Sensor Assembly |