Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Camshaft Timing Chain- Right Side - Remove - Camshaft Timing Chain Assembly Replacement - Right Side
Fuel Pump (2) - Remove - Fuel Pump Replacement
- Remove the ground wire bolt and ground wire at the right front of the cylinder head. Ground Repair
Camshaft Bearing Cap (2) - Remove - Camshaft Replacement - Right Side
- NOTE:
It is not necessary to remove the camshaft position actuators from the camshafts unless visual damage is present.
Camshaft Carrier Bolt (1) - Remove [14x]
- Camshaft Carrier (2) - Remove