Single Use Fasteners and Components
WARNING: This page is about a different variant/trim than selected.
Intake Manifold Seal [6x]
| Callout | Component Name |
|---|---|
| Preliminary Procedure Camshaft Housing Cover Insulator Replacement - Left Side |
|
| 1 | Electrical Connector |
| 2 | Valve Rocker Arm Oil Control Valve Bolt
CAUTION:
Refer to Fastener Caution . Tighten 10 N.m (89 lb in) |
| 3 | Valve Rocker Arm Oil Control Valve Procedure
NOTE:
Lubricate the seals with clean engine oil. |