Neutral Sensor Installation
WARNING: This page is about a different variant/trim than selected.
NOTE:
Callouts items in the following chart represent components shown in graphic above.
Neutral Sensor Installation
| Callout | Component Name |
|---|---|
| 1 | Neutral Position Sensor Assembly - Model Dependent |
| 2 | Neutral Position Sensor Bolt/Screw - Model Dependent
CAUTION:
Refer to Fastener Caution .
NOTE:
Clean the threads and apply a threadlocker. Refer to Adhesives, Fluids, Lubricants, and Sealers (M13) Tighten 11Y (96 lb in) |