2nd Gear Installation

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
1	1st-2nd Synchronizer Assembly NOTE: Check the 1st/2nd synchronizer assembly scribe marks for correct position. The scribe "2.N.D." must face 2nd gear.
2	2nd Gear Blocking Ring Assembly NOTE: Ensure the tabs on the blocking ring align with the corresponding pockets in the synchronizer hub. Click video link above for reference.
3	2nd Gear Assembly
4	2nd Gear Bearing Assembly