Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P1516
- DTC P1682 = Not set
- Desired Throttle Position = Stable - Greater than 4 s
- Ignition Voltage = Greater than 6.4 V
- Throttle Position Learn = Not Activated
Frequency the DTC runs = Continuously - After the running conditions are met
P2101 Condition 1
- DTC P1682 = Not set
- Engine = Running - Ignition Voltage = Greater than 5.5 V
- Ignition = On - Ignition Voltage = Greater than 8.4 V
- Throttle Position Learn = Not Activated
Condition 2
- DTC P1682 = Not set
- Throttle Position Learn = Active
Frequency the DTC runs = Continuously - After the running conditions are met
P2119
- DTC P0122, P0123, P0222, P0223, P06A3 = Not set
- Engine = Not Running
- Ignition Voltage = Greater than 5.4 V
Frequency the DTC runs = Continuously - After the running conditions are met
P2176
- Ignition Voltage = Greater than 6.4 V
- Throttle Position Learn = Active
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 2 s