Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

P026B, P05EC, P16F3

DTC P0101, P0102, P0103, P0106, P0107, P0108, P2227, P2228, P2229, P2230 = Not set
Engine Speed = Greater than 680 RPM

Frequency the DTC runs = Continuously - After the running conditions are met

P0601, P0602, P0604, P0605, P0607, P060A-P060D, P0610, P061C, P0630, P064F, P160A, P160D, P160E, P161C, P264F, P3191

Ignition = On

Frequency the DTC runs = Continuously - After the running conditions are met

P0603, P062F, P08FF

Ignition = On

Frequency the DTC runs = Once - Per drive cycle - After the running conditions are met

P0606, P062B, P16E9-P16F0, P30D6-P30DD

Run/Crank = Greater than 11 V

Frequency the DTC runs = Continuously - After the running conditions are met

P064D, P064E, P134C, P27B5

Frequency the DTC runs = Continuously - After the running conditions are met

P06D1

P2610, P262B

Run/Crank = Inactive

Frequency the DTC runs = Once - After ignition Off - After the running conditions are met - For 20 s