Conditions for Running the DTC

P0089, P228C, P228D

• DTC P0016, P0017, P0018, P0019, P0090, P0091, P0092, P00C8, P00C9, P00CA, P0111, P0112, P0113, P0116, P0117, P0118, P0128, P0192, P0193, P0335, P0336, P0340, P0341, P0345, P0346, P0365, P0366, P0390, P0391, P0628, P1682 = Not set
• BARO = Greater than 70 kPa (10.2 PSI)
• Engine = Running
• Fuel Pressure Sensor = Greater than 275 kPa (39.9 PSI)
• IAT Sensor 1 = Warmer than -20°C (-4°F)
• Ignition Voltage = Greater than 11 V

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 12 s

P00C6

• DTC P0090, P0091, P0092, P00C8, P00C9, P00CA, P0116, P0117, P0118, P0128, P0192, P0193, P0335, P0336, P0340, P0341, P0345, P0346, P0365, P0366, P0390, P0391, P0628, P1682 = Not set
• BARO = Greater than 70 kPa (10.2 PSI)
• ECT Sensor = -100 to 150°C (-148 to 302°F)
• Engine = Not Running
• Fuel Pressure Sensor = Greater than 0 kPa (0 PSI)
• IAT Sensor 1 = Warmer than -20°C (-4°F)
• Ignition Voltage = Greater than 8 V

Frequency the DTC runs = Continuously - After the running conditions are met

P2C1E, P2C1F, P2C20

• DTC P0016, P0017, P0018, P0019, P0090, P0091, P0092, P00C8, P00C9, P00CA, P0111, P0112, P0113, P0116, P0117, P0118, P0128, P0192, P0193, P0335, P0336, P0340, P0341, P0345, P0346, P0365, P0366, P0390, P0391, P0627, P0628, P0629, P111E, P127C, P128A, P128B, P128F, P1682, P16E4, P16E5 = Not set
• BARO = Greater than 70 kPa (10.2 PSI)
• Calculated Catalyst Temperature = Colder than 500°C (932°F)
• ECT Sensor = -12 to 66°C (10 to 151°F)
• Engine = Running
• Fuel Pressure Sensor = Greater than 275 kPa (39.9 PSI)
• IAT Sensor 1 = Warmer than -20°C (-4°F)
• Ignition Voltage = Greater than 11 V