Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P227BCondition 1

Barometric Pressure Sensor 2 50 to 115 kPa (7 to 17 PSI) - For greater than 1 s

Condition 2

The following parameters are not within 10 kPa (1.5 PSI) of each other:

The above condition(s) must occur for greater than 1 s.

P227C

Barometric Pressure Sensor 2 = Less than 50 kPa (7.25 PSI) - For greater than 4 s

P227D

Barometric Pressure Sensor 2 = Greater than 115 kPa (16.7 PSI) - For greater than 4 s

P227E

Barometric Pressure Sensor 2 = Signal noisy or erratic - For greater than 4 s