Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For an overview of the component/system, refer to: Cooling System Description and Operation (LM2)
| Circuit | Description |
|---|---|
| Control - Terminal 1 | The output circuit is switched from ground to 12 V to activate the component. |
| Control - Terminal 2 | The output circuit is switched from ground to 12 V to activate the component. |
| Component | Description |
|---|---|
| K20 Engine Control Module | The control module contains a microprocessor used to process input data to control outputs. The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |
| Q97M Engine Coolant Flow Control Valve - Main | The component is actuated by a bidirectional DC motor.Q97M is part of the component: Q97 Engine Coolant Flow Control Valve |
To achieve the normal operating temperature faster, an actuator valve can block the coolant flow through the engine block.