Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For an overview of the component/system, refer to: Glow Plug System Description
| Circuit | Description |
|---|---|
| Control | The output circuit is switched to 10 V to activate the component.When the output is commanded On, the voltage can range between 4.7 and 10 V. The output is PWM controlled. |
| Component | Description |
|---|---|
| E12 Glow Plug | Glow plugs are electric heating devices in the combustion chambers of diesel engines. |
| K20 Engine Control Module | The control module contains a microprocessor used to process input data to control outputs.The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |