Conditions for Running the DTC

• DTC P0096 - P099, P00E9, P00EA - P00EC, P0101, P0102, P0103, P0106 - P0108, P0111 - P0114, P0116 - P0119, P0128, P0171, P0172, P0300, P0301 - P0306, P0400, P0401, P0402, P0403, P0405, P0406, P042E, P042F, P0462, P0463, P0489, P0490, P049D, P062D, P0502, P0503, P0722, P0723, P0806, P0807, P0808, P140B, P140C, P2227 - P2230, P2271, P227B - P227E = Not set
• Barometric Pressure = Greater than 70 kPa (10 PSI)
• { If equipped } Clutch Pedal = Not Pressed
• { If equipped } Clutch Pedal = EngagedLess than 12%
• { If equipped } Clutch Pedal = EngagedGreater than 75%
• Engine = Running - For greater than 1 min
• Engine = Idling - For greater than 5 s
• Engine Coolant Temperature = Greater than 60°C (140°F)
• Engine speed varies less than +/-25 RPM
• Ignition and Start Signal = 11 to 32 V
• Intake Air Temperature Sensor = Greater than -20°C (-4°F)
• Scan Tool Control Function = Inactive
• Torque Converter Clutch = Inactive
• Transmission = Not Shifting
• Vehicle Speed = Less than 1.6 km/h (1 MPH)

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 10 s