Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P00C7
- DTC P0106-P0108, P0237, P0238, P2227-P2230, P2610 = Not set
- DTC P0107, P0108, P0237, P0238, P2228, P2229 = Not pending
- Barometric Pressure Sensor = 50 to 115 kPa (7.3 to 16.7 PSI)
- Barometric Pressure Sensor 2 = 50 to 115 kPa (7.3 to 16.7 PSI)
- Engine = Not Running
- Ignition and Start Signal = Greater than 11 V
- Manifold Absolute Pressure - = 50 to 115 kPa (7.3 to 16.7 PSI)
- Time between current ignition cycle and the last time the engine was running = Greater than 5 s
Frequency the DTC runs = Continuously - After the running conditions are met
P1199
- DTC P0100-P0103, P0107, P0108, P0116-P0119, P0128, P0335, P0336, P020A-P020F, P0201-P0208, P021A, P021B, P0216, P0261, P0262, P0264, P0265, P0267, P0268, P0270-P0274, P0276, P0277, P0279, P0280, P0282, P0283, P02EE, P02EF, P02F0-P02F5, P02E8, P02E9, P062B, P062D, P111E, P122D, P124A-P124F, P126A, P1248, P1249, P2147, P2148, P2150, P2151, P2153, P2154, P2156, P2157 P2228-P2230, P227E, U0654 = Not set
- Calculated Fuel Flow = Less than a predefined threshold
- Engine Coolant Temperature = Warmer than 70°C (158°F)
- Engine Speed = Less than 950 RPM
- Ignition and Start Signal = Greater than 11 V
- Intake Air Flow Valve Position = Greater than 90%
Frequency the DTC runs = Continuously - After the running conditions are met