Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0090 - P0092, P00C9, P00CA, P10E6 - P10E8, P233A - P233C
- Engine = Not cranking
- Engine = Running
- Ignition and Start Signal = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P163A
- DTC P0090, P0091, P0092 = Not set
- Fuel Rail Pressure is being controlled by Fuel Pressure Regulator 1 & 3.
- Ignition and Start Signal = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P163B
- DTC P2294, P2295, P2296 = Not set
- Fuel Rail Pressure is being controlled by Fuel Pressure Regulator 2.
- Ignition and Start Signal = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P2294 - P2296
- Engine = Not cranking
- Fuel Rail Pressure is being controlled by Fuel Pressure Regulator 2.
- Ignition and Start Signal = Greater than 6 V
Frequency the DTC runs = Continuously - After the running conditions are met