Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- WARNING:
In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool.
WARNING:Avoid contact with HOT components. Wear safety glasses and protective gloves to avoid personal injury.
Disconnect the exhaust gas recirculation cooler temperature sensor electrical connector (1).
- Disengage the exhaust gas recirculation cooler temperature sensor retainers.
Turbocharger Heat Shield Bolt (1) - Remove [2x]
- Turbocharger Heat Shield Nut (2) - Remove
- Reposition the heat shield to access the sensor.
Exhaust Gas Recirculation Cooler Temperature Sensor (1) - Remove