LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Tahoe SSV >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Mechanical - 3.0L (Lm2) Diesel - Repair Instructions (4 Of 11)) >> Repair Instructions >> Oil Filler Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Oil Filler Cap - Remove
  2. GM5171779Courtesy of GENERAL MOTORS COMPANY

    Intake Manifold Cover Bolt (1) - Remove

  3. Intake Manifold Cover (2) - Remove
  4. GM5499646Courtesy of GENERAL MOTORS COMPANY

    Engine Wiring Harness Bracket Nut (1) - Remove [2x]

  5. Engine Wiring Harness Bracket Bolt (2) - Remove
  6. Engine Wiring Harness Bracket (3) - Reposition
  7. GM5218434Courtesy of GENERAL MOTORS COMPANY

    Detach wiring harness at the oil filler tube support stud (2) and position harness aside.

  8. Oil Filler Tube Support Stud (2) - Remove
  9. Oil Filler Tube (3) - Remove
scientia non olet · About LEMON Manuals