Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P018B, P018C, P018D, P0641, P064A, P0606, P1029, P102A, P102B, P102C, P1255, P129F, P12A6, P14D5, P165C, P2BB3, P20CD, U18A7 = Not set
- Fuel Pump Command = On
- Ignition and Start Signal = 11 to 32 V
- Engine Run Time = Greater than 30 s
- Fuel Level Sensor = Greater than 10%
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 1 s