Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For an overview of the component/system, refer to: Fuel System Description
| Circuit | Description |
|---|---|
| Ignition - Relay Coil | Supplied from a relay. |
| B+ - Relay Switch | Supplied from a fuse. |
| Control - Component | The output circuit is switched to 12 V to activate the component. |
| Control - Relay Coil | The output circuit is switched to ground to activate the component. |
| Ground - Component | Chassis Ground |
| Component | Description |
|---|---|
| K20 Engine Control Module | The control module contains a microprocessor used to process input data to control outputs.The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |
| KR22 Fuel Heater Relay | A relay is a switch that is actuated by a solenoid. |