Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P2452
- DTC P2453, P2454, P2455, P2456, or P262B = Not set
- Engine = Off - For greater than 15 min
- Ignition and Start Switch Signal = On & Engine = Not Running
Frequency the DTC runs = During engine startup & After ignition Off - After the running conditions are met
P2454, P2455
Engine = Running
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 3 s
P2456
- DTC P2454, P2455 = Not set
- Engine = Running
- Ignition and Start Signal = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 3 s