LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Tahoe SSV >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Hinge Replacement >> Installation Procedure

Installation Procedure

  1. GM5577699Courtesy of GENERAL MOTORS COMPANY

    Hood Hinge (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Hood Hinge Bolt (1) - Install and tighten [2x] - Fastener Specifications 
  3. GM5575861Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Ensure the clip is fully seated when the rod is reinstalled. If the clip cannot be fully seated, a new rod should be installed.

    Hood Strut (2) - Install

  4. Install the 2 metal clips (1) to each end of the hood strut (2).
  5. GM5570512Courtesy of GENERAL MOTORS COMPANY

    With the aid of an assistant, install the hood (2).

  6. Hood Hinge Nut (1) - Install and tighten [4x] - Fastener Specifications 
  7. Adjust if necessary. Hood Adjustment 
scientia non olet · About LEMON Manuals