Removal Procedure

Open the liftgate.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Component removed for graphic clarity.

Using the appropriate tool, release the tabs on the back body opening side center gutter (1).
Courtesy of GENERAL MOTORS COMPANY

Release the lower actuator retainer clip using a small flat bladed tool to retract clip slightly while removing strut end from corresponding ball stud.
Liftgate Power Assist Actuator (1) - Reposition
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Component removed for graphic clarity.

Back Body Opening Side Molding Bolt (1) - Remove
Release the 4 back body opening side gutter retainers and remove the back body opening side gutter (2).