Removal Procedure
Instrument Panel Lower Trim Panel Outer Filler(1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Fuse Block Access Hole Cover(1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Instrument Panel Trim Plate Applique(1) - Remove
Instrument Panel Trim Pad Bolt(1) - Remove[2x]
- Instrument Panel Trim Pad(2) - Remove
- Disconnect the electrical connectors.
Release the retaining tabs.
- Head-Up Display Switch(1) - Remove