Clutch Backing Plate Retaining Ring Specifications (8L90)

WARNING: This page is about a different variant/trim than selected.

2-3-4-6-8 Clutch Backing Plate Retaining Ring

Clutch Pack Travel Specification - 1.54 - 2.20 mm (0.061 - 0.087 in)
Retaining Ring Thickness		Ring Identification Color
Metric	English	Ring Identification Color
NOTE: After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
1.75 - 1.85 mm	0.069 - 0.073 in	Purple
2.11 - 2.21 mm	0.083 - 0.087 in	No Color
2.46 - 2.56 mm	0.097 - 0.101 in	Yellow
2.82 - 2.92 mm	0.111 - 0.115 in	Light Blue
3.18 - 3.28 mm	0.125 - 0.129 in	Orange
3.54 - 3.64 mm	0.139 - 0.143 in	Dark Green
3.89 - 3.99 mm	0.153 - 0.157 in	Silver

4-5-6-7-8 Reverse Clutch Backing Plate Retaining Ring

Clutch Pack Travel Specification - 1.24 - 1.90 mm (0.049 - 0.075 in)
Retaining Ring Thickness		Ring Identification Color
Metric	English	Ring Identification Color
NOTE: After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
1.75 - 1.85 mm	0.069 - 0.073 in	Purple
2.11 - 2.21 mm	0.083 - 0.087 in	No Color
2.46 - 2.56 mm	0.097 - 0.101 in	Yellow
2.82 - 2.92 mm	0.111 - 0.115 in	Light Blue
3.18 - 3.28 mm	0.125 - 0.129 in	Orange
3.54 - 3.64 mm	0.139 - 0.143 in	Dark Green
3.89 - 3.99 mm	0.153 - 0.157 in	Silver

1-3-5-6-7 Clutch Backing Plate Retaining Ring

Clutch Pack Travel Specification - 4 Plates - 1.82 - 2.30 mm (0.072 - 0.091 in) Clutch Pack Travel Specification - 5 Plates - 1.50 - 2.10 mm (0.059 - 0.083 in)
Retaining Ring Thickness		Ring Identification Color
Metric	English	Ring Identification Color
NOTE: After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
2.45 - 2.55 mm	0.096 - 0.100 in	Purple
2.79 - 2.89 mm	0.110 - 0.114 in	Silver
3.13 - 3.23 mm	0.123 - 0.127 in	Yellow
3.47 - 3.57 mm	0.137 - 0.141 in	Light Blue
3.81 - 3.91 mm	0.150 - 0.154 in	Orange

1-2-3-4-5 Reverse Clutch Backing Plate Retaining Ring

Clutch Pack Travel Specification - 0.93 - 1.82 mm (0.037 - 0.072 in)
Retaining Ring Thickness		Ring Identification Color
Metric	English	Ring Identification Color
NOTE: After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
1.91 - 2.01 mm	0.075 - 0.079 in	Light Blue
2.25 - 2.35 mm	0.089 - 0.093 in	Orange
2.59 - 2.69 mm	0.102 - 0.106 in	Dark Green
2.92 - 3.02 mm	0.115 - 0.119 in	Yellow
3.26 - 3.36 mm	0.128 - 0.132 in	Purple