2-3-4-6-8 and 4-5-6-7-8 Reverse Clutch Housing Assembly
WARNING: This page is about a different variant/trim than selected.
NOTE:
Callouts in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| 520 | 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Housing Bearing |
| 521 | 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Housing |
| 522 | 2-3-4-6-8 Clutch Piston Dam Seal |
| 523 | 4-5-6-7-8-Reverse Clutch Piston Stop Seal |
| 524 | 4-5-6-7-8-Reverse Clutch Piston Seal |
| 525 | 2-3-4-6-8 Clutch Piston Seal |
| 526 | 2-3-4-6-8 Clutch Piston |
| 527 | 2-3-4-6-8 Clutch Piston Return Spring |
| 528 | 2-3-4-6-8 Clutch Piston Dam Seal- Inner |
| 529 | 2-3-4-6-8 Clutch Piston Dam |
| 530 | 2-3-4-6-8 Clutch Piston Dam Seal- Outer |
| 531 | 2-3-4-6-8 Clutch Piston Dam Retaining Ring |
| 532 | 4-5-6-7-8-Reverse Clutch Piston Stop |
| 533 | 4-5-6-7-8-Reverse Clutch Piston Seal |
| 534 | 4-5-6-7-8-Reverse Clutch Piston |
| 535 | 4-5-6-7-8-Reverse Clutch Piston Return Spring |
| 536 | 4-5-6-7-8-Reverse Clutch Piston Seal |
| 537 | 4-5-6-7-8-Reverse Clutch Piston Dam |
| 538 | 4-5-6-7-8-Reverse Clutch Piston Dam Retaining Ring |
| 539 | 4-5-6-7-8-Reverse Clutch Plate - Wave |
| 540 | 4-5-6-7-8-Reverse Clutch Plate |
| 541 | 4-5-6-7-8-Reverse Clutch Plate - Friction |
| 542 | 4-5-6-7-8-Reverse Clutch Backing Plate |
| 543 | 4-5-6-7-8-Reverse Clutch Backing Plate Retaining Ring |
| 544 | 2-3-4-6-8 Clutch Apply Ring |
| 545 | 2-3-4-6-8 Clutch Plate - Wave |
| 546 | 2-3-4-6-8 Clutch Apply Plate |
| 547 | 2-3-4-6-8 Clutch Plate |
| 548 | 2-3-4-6-8 Clutch Plate - Friction |
| 549 | 2-3-4-6-8 Clutch Backing Plate |
| 550 | 2-3-4-6-8 Clutch Backing Plate Retaining Ring |