Bushing, Bearing, and Washer
WARNING: This page is about a different variant/trim than selected.
NOTE:
Callouts in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| 6 | Drive Sprocket Thrust Washer- Front |
| 8 | Drive Sprocket Thrust Washer- Rear |
| 20 | Output Carrier Thrust Bearing |
| 55 | 1-3-5-6-7 Clutch Thrust Bearing |
| 56 | 1-3-5-6-7 Clutch Thrust Bearing Washer |
| 58 | 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Thrust Bearing |
| 59 | 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Thrust Bearing Washer |
| 61 | 4-5-6-7-8 Reverse Clutch and Direct Overdrive Internal Gear Hub Thrust Bearing |
| 63 | Direct/Overdrive Carrier Thrust Bearing (8L45 Only) |
| 66 | Input Sun Gear Thrust Bearing |
| 70 | 1-2-3-4-5-Reverse Clutch Hub Thrust Bearing |
| 75 | Output Sun Gear Thrust Bearing |
| 77 | Output Shaft Seal |
| 415 | Output Shaft Bearing |
| 505 | 1-3-5-6-7 Clutch Bearing |
| 520 | 2-3-4-6-8 and 4-5-6-7-8-Reverse Clutch Housing Bearing |
| 565 | Input Carrier Thrust Washer |
| 568 | Input Carrier Thrust Washer |