Transmission Case Washer Specifications (10L60)
WARNING: This page is about a different variant/trim than selected.
Transmission Case Washer Specifications
| Transmission End Play Specification - 0.20 - 0.79 mm (0.007 - 0.031 in) | ||
|---|---|---|
| Transmission Case Washer Thickness | Ring Identification Color | |
| Metric | English | |
|
NOTE:
After measuring end play travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing case washer, and then choose a thicker or thinner case washer that will bring the measurement within specification. |
||
| 2.90 - 3.00 mm | 0.114 - 0.118 in | Orange |
| 3.05 - 3.15 mm | 0.120 - 0.124 in | Steel Blue |
| 3.20 - 3.30 mm | 0.125 - 0.129 in | Black |
| 3.35 - 3.45 mm | 0.131 - 0.135 in | Light Blue |
| 3.50 - 3.60 mm | 0.137 - 0.141 in | Green |
| 3.65 - 3.75 mm | 0.143 - 0.147 in | Pink |
| 3.80 - 3.90 mm | 0.149 - 0.153 in | Yellow |