Clutch Backing Plate Retaining Ring Specifications

WARNING: This page is about a different variant/trim than selected.

2-3-4-5-7-9-10 Clutch Backing Plate Retaining Ring

Clutch Pack Travel Specification - 1.57 - 1.87 mm (0.061 - 0.073 in)
Retaining Ring Thickness
Metric	English
NOTE: After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
1.45 - 1.55 mm	0.057 - 0.061 in
1.65 - 1.75 mm	0.064 - 0.068 in
1.85 - 1.95 mm	0.072 - 0.076 in
2.05 - 2.15 mm	0.080 - 0.084 in
2.25 - 2.35 mm	0.088 - 0.092 in

4-5-6-7-8-9-10-Reverse Clutch Backing Plate Retaining Ring

Clutch Pack Travel Specification - 1.22 - 1.52 mm (0.048 - 0.059 in)
Retaining Ring Thickness
Metric	English
NOTE: After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
1.45 - 1.55 mm	0.057 - 0.061 in
1.65 - 1.75 mm	0.064 - 0.068 in
1.85 - 1.95 mm	0.072 - 0.076 in
2.05 - 2.15 mm	0.080 - 0.084 in
2.25 - 2.35 mm	0.088 - 0.092 in

1-2-3-4-6-7-8-10-Reverse Clutch Backing Plate Retaining Ring

Clutch Pack Travel Specification - 1.75 - 2.05 mm (0.068 - 0.080 in)
Retaining Ring Thickness
Metric	English
NOTE: After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
1.75 - 1.85 mm	0.068 - 0.072 in
1.95 - 2.05 mm	0.076 - 0.080 in
2.15 - 2.25 mm	0.084 - 0.088 in
2.35 - 2.45 mm	0.092 - 0.096 in
2.55 - 2.65 mm	0.100 - 0.104 in
2.75 - 2.85 mm	0.108 - 0.112 in

1-2-8-9-10-Reverse Clutch Backing Plate Retaining Ring

Clutch Pack Travel Specification - 1.31 - 1.74 mm (0.051 - 0.068 in)
Retaining Ring Thickness		Ring Identification Color
Metric	English	Ring Identification Color
NOTE: After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
2.23 - 2.36 mm	0.087 - 0.092 in	White
2.53 - 2.66 mm	0.099 - 0.104 in	Green
2.83 - 2.96 mm	0.111 - 0.116 in	Yellow
3.13 - 3.26 mm	0.123 - 0.128 in	Blue
3.43 - 3.56 mm	0.135 - 0.140 in	Orange