1-3-5-6-7-8-9 Clutch Backing Plate Specifications (10L60)
WARNING: This page is about a different variant/trim than selected.
1-3-5-6-7-8-9 Clutch Backing Plate Specifications
| Clutch Pack Travel Specification - 1.12 - 1.72 mm (0.044 - 0.067 in) | |
|---|---|
| Backing Plate Thickness | |
| Metric | English |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing backing plate, and then choose a thicker or thinner backing plate that will bring the measurement within specification. |
|
| 1.60 - 1.70 mm | 0.063 - 0.067 in |
| 1.95 - 2.05 mm | 0.077 - 0.081 in |
| 2.30 - 2.40 mm | 0.091 - 0.095 in |
| 2.65 - 2.75 mm | 0.104 - 0.108 in |
| 3.00 - 3.10 mm | 0.118 - 0.122 in |