1-2-3-4-5-6-Reverse Clutch Apply Plate Specifications (10L60)
WARNING: This page is about a different variant/trim than selected.
1-2-3-4-5-6-Reverse Clutch Apply Plate Specifications
| Clutch Pack Travel Specification - 0.36 - 0.86 mm (0.014 - 0.034 in) | |
|---|---|
| Apply Plate Thickness | |
| Metric | English |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing apply plate, and then choose a thicker or thinner apply plate that will bring the measurement within specification. |
|
| 3.55 - 3.75 mm | 0.140 - 0.148 in |
| 3.75 - 3.95 mm | 0.148 - 0.156 in |
| 3.95 - 4.15 mm | 0.156 - 0.163 in |
| 4.15 - 4.35 mm | 0.163 - 0.171 in |
| 4.35 - 4.55 mm | 0.171 - 0.179 in |
| 4.55 - 4.75 mm | 0.179 - 0.187 in |