Intake Manifold and Components
WARNING: This page is about a different variant/trim than selected.
NOTE:
Callouts items in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| 1 | Fuel Pump Insulator |
| 2 | Upper Intake Manifold Bracket |
| 3 | Upper Intake Manifold Bracket Bolt |
| 4 | Fuel Rail Noise Shield |
| 5 | Intake Manifold Sight Shield |
| 6 | Intake Manifold Sight Shield Bolt |
| 7 | Oil Fill Cap |
| 8 | Evaporative Emission Canister Purge Valve Pipe Assembly |
| 9 | Evaporative Emission Canister Purge Valve Assembly |
| 10 | Throttle Body Assembly Gasket |
| 11 | Throttle Body Assembly |
| 12 | Throttle Body Assembly Bolt |
| 13 | Manifold Absolute Pressure (MAP) Sensor Bolt |
| 14 | Manifold Absolute Pressure (MAP) Sensor |
| 15 | Intake Manifold Bolt |
| 16 | Radiator Inlet Pipe Bolt |
| 17 | Radiator Inlet Pipe |
| 18 | Radiator Inlet Hose |
| 19 | Fuel Feed Pipe Assembly Stud |
| 20 | Fuel Feed Pipe Assembly |
| 21 | Fuel Pump Insulator |
| 22 | Fuel Pump Bolt |
| 23 | Fuel Feed Intermediate Pipe Assembly |
| 24 | Fuel Pump Cover |
| 25 | Fuel Pump Cover Bolt |
| 26 | Fuel Pump Housing Gasket |
| 27 | Fuel Pump Housing O-Ring Seal |
| 28 | Fuel Pump |
| 29 | Intake Manifold Bolt |
| 30 | Intake Manifold Gasket |
| 31 | Intake Manifold |