Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition ON.
- Verify the Engine Mount Solenoid Valves turn on and off or click when commanding the Driveline Mount Output 1 and 2 On and Off with a scan tool.
- If the Engine Mount Solenoid Valves do not turn on and off or click
Refer to Circuit/System Testing
- Go to next step: If the Engine Mount Solenoid Valves do turn on and off or click
- If the Engine Mount Solenoid Valves do not turn on and off or click
- All OK.