LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Engine Controls And Fuel - 2.0L - Diagnostic Information And Procedures (3 Of 3)) >> Diagnostic Information and Procedures >> Inspection/Maintenance Complete System Set Procedure >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

For an overview of the component/system, refer to: Inspection/Maintenance Description and Operation

Several states require vehicles to pass the inspection/maintenance (I/M) emission inspection in order to renew the vehicle's license plate.

This procedure is to satisfy the enable criteria necessary to execute all of the Inspection/Maintenance (I/M) readiness diagnostics and complete the trips for those particular diagnostics. When all I/M monitored diagnostic tests are completed, the I/M system status parameters are set to Complete. Perform the Inspection/Maintenance Complete System Set Procedure if any I/M system status parameters are set to Incomplete.