Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P2817
- DTC P0101-P0108, P0171-P0175, P0201-P0208, P0300-P0308, P0716, P0717, P0722, P0723, P077C, P077D, P07BF, P07C0, P1824, P182A-P182F, P1838-P1841, P18B5-P18BF, P18C0-P18C3, P1915, P2534 = Not set
- Accelerator Pedal Position = Greater than 1%
- Battery Voltage = 9 to 32 V
- High Side Driver 1, 2 = On
- Ignition Voltage = 9 to 32 V
- Transmission Gear = Drive
- Transmission OSS = Greater than 100 RPM
Frequency the DTC runs = Continuously - After the running conditions are met
P2818
- DTC P0716, P0717, P07BF, P07C0, P2812, P2814, P2815 = Not set
- Battery Voltage = 9 to 32 V
- Engine Speed = 400 to 900 RPM
- Ignition Voltage = 9 to 32 V
- Transmission Gear = Drive
- Transmission Fluid Temperature = 0 to 40°C (32 to 104°F)
Frequency the DTC runs = Continuously - After the running conditions are met